Temporary Work Volume (Sdpv) Creation; Figure 5.8 Temporary Work Volume (Sdpv) Creation - Fujitsu ETERNUS DX200F Configuration Manual

Chapter 5 General Settings
5.7 RAID Configuration Settings
*1: Enter the capacity of the copy source volume during creation of SDV.
*2: If "7" is specified for the number of volumes, sdv0, sdv1, sdv2, sdv3, sdv4, sdv5, and sdv6 volumes
are created.
A confirmation screen appears.
4
Click the [OK] button.
The volume is created and the registration completion screen appears.
5
Click the [Done] button.
The screen display returns to the [Volume] screen.
5.7.4

Temporary Work Volume (SDPV) Creation

Create a temporary work volume in the backup RAID group.
Create a volume as an expansion area of SDV in the backup RAID group "RG1" created in
Creation" (page

Figure 5.8 Temporary Work Volume (SDPV) Creation

Backup RAID group (RG1)
1.6TB
1.6TB
RAID5 (4+1)
49).
1.6TB
1.6TB
1.6TB
FUJITSU Storage ETERNUS DX200F All Flash Array Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
Temporary work volume
500GB
sdpv
(Snap Data Pool Volume)
54
"5.7.1 RAID Group
P3AM-8462-01ENZ0