Chapter 3
Checking the Configuration Environment
This manual explains how to configure the system with the ETERNUS DX, taking a basic configuration as an
example.
3.1
System Configuration Example
This section describes the procedure for the following system configuration as an example.
iSCSI interface connection
•
Multipath connection using the ETERNUS Multipath Driver
•
Event notification (SNMP trap transmission, email notification, syslog notification, and remote support) via
•
LAN
Generation management of data by acquisition of backup based on the day of the week with generation
•
copy using SnapOPC+
■
Configuration Diagram
The following diagram shows a system configuration example.
Figure 3.1 System Configuration Example
Server
SNMP manager
iSCSI SAN
LAN for Operation Management
Mail server
FUJITSU Storage ETERNUS DX200F All Flash Array Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
ETERNUS DX
Multipath
PC for Operation
Management/
PC for setup
Syslog server
21
Remote support center
P3AM-8462-01ENZ0