Chapter 5
General Settings
5.7
RAID Configuration Settings
2
In [Action], click [Create].
The [Create Volume] screen appears.
3
Set the required items in the [Create Volume] screen and click the [Create] button.
Name: main
Capacity: 1TB
Type: Standard
RAID Group / TPP Selection: Manual
Manual Setting: RG0
A confirmation screen appears.
4
Click the [OK] button.
The volume is created and the registration completion screen appears.
5
Click the [Done] button.
The screen display returns to the [Volumes] screen.
6
Then, create SDV and SDPV in the backup RAID group (RG1).
For the creation procedure, refer to
and
"5.7.4 Temporary Work Volume (SDPV) Creation" (page
"5.7.3 Generation Management Volume (SDV) Creation" (page 53)
FUJITSU Storage ETERNUS DX200F All Flash Array Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
54).
52
P3AM-8462-01ENZ0