Fujitsu ETERNUS DX200F Configuration Manual page 111

Chapter 8 SAN Connection Settings
8.2 Server Connection Setup
8
Check whether a file or other item can be created in the created drive.
■
SnapOPC+ Destination Settings
Set up the disk created in [Snap Data Volume].
1
During volume creation, right-click the disk created in [Snap Data Volume] and select [New Simple Vol-
ume].
FUJITSU Storage ETERNUS DX200F All Flash Array Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
111
P3AM-8462-01ENZ0