Chapter 8
SAN Connection Settings
8.2
Server Connection Setup
8.2.2
LUN Recognition Check
When connection is completed, confirm that the server recognizes the LUN set to the ETERNUS DX.
■
When Checking Using the Windows Device Manager
The following procedure explains how to check LUN using the Windows Device Manager.
1
Open [Device Manager] and expand [Disk drives].
2
Confirm that the same number of "FUJITSU..." items are displayed as the number of LUNs that are set.
If the example is used, eight "FUJITSU..." items are displayed.
FUJITSU Storage ETERNUS DX200F All Flash Array Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
102
P3AM-8462-01ENZ0