Fujitsu ETERNUS DX200F Configuration Manual page 47

Chapter 5 General Settings
5.6 Firewall Settings
4
Select the port to be set. In [Action], click [Firewall Setting].
5
In the [Setup Firewall] screen, specify whether to enable/disable each service.
To enable a service, select the checkbox for that service.
HTTP connection/HTTPS connection
•
This service is enabled when an ETERNUS DX is connected via ETERNUS Web GUI.
Data is encrypted and transferred for HTTPS.
• Telnet connection/SSH connection
This service is enabled when an ETERNUS DX is connected via ETERNUS CLI.
Data is encrypted and transferred for Secure SHell (SSH).
ICMP
•
This service is enabled when an ICMP connection is allowed.
FUJITSU Storage ETERNUS DX200F All Flash Array Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
47
P3AM-8462-01ENZ0