Fujitsu ETERNUS DX200F Configuration Manual page 134

Chapter 11 Solution Configuration
11.1 Continuous Business
●
Required Environment
ETERNUS SF Advanced Copy Manager (ACM Agent) and a gateway device (that connects the storage systems)
must be installed in each operation site and backup site. ETERNUS SF AdvancedCopy Manager (ACM Manag-
er) must be installed in either of the sites (one ACM Manager can manage the ACM Agents of both sites).
●
Configuration Procedure
Settings for the ETERNUS DX
•
Register the following information with ETERNUS Web GUI.
- Host interface settings
Set the port mode of the host interface to RA or CA/RA.
Copy table size settings
-
Set a memory area to manage the REC progress.
Copy path settings
-
Set the information of the copy paths between the storage systems to perform an REC. Confirm that the
storage systems can communicate with each other after setting of the copy paths is complete.
REC buffer settings
-
This setting is required when an REC is performed in the Consistency mode. The Consistency mode guar-
antees the order of data transfers to the connection destination storage system for all of the specified
REC sessions.
REC disk buffer registration
-
Set the REC disk buffer when REC buffer capacity is to be expanded.
Settings for ETERNUS SF AdvancedCopy Manager
•
Register the following information in the operation management server (ETERNUS SF AdvancedCopy Man-
ager).
- Registration of the ETERNUS SF AdvancedCopy Manger license
Register a license key via the ETERNUS SF Web Console or ETERNUS SF CLI.
Business server registration
-
Register the server in which the ACM Agent is running as the business server in the operation manage-
ment server.
Registration of the device information in the server that is the management target
-
Register the device information in the server that is the management target to the operation manage-
ment server.
- Settings for replication
Register the replication source volumes and the replication destination volumes.
For more details on the settings for ETERNUS SF AdvancedCopy Manager, refer to "ETERNUS SF AdvancedCopy
Manager Operation Guide".
FUJITSU Storage ETERNUS DX200F All Flash Array Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
134
P3AM-8462-01ENZ0