Chapter 5
General Settings
5.7
RAID Configuration Settings
Maintenance Secure
•
This service is enabled for connections from things such as monitoring software or for using the re-
mote support function to download firmware between storage systems.
SSH encrypts and sends/receives data.
SNMP
•
This service is enabled when an ETERNUS DX is connected via the SNMP manager.
RCIL
•
This service is enabled when an RCIL Power Synchronized Connection is used.
•
ETERNUS DX Discovery
Change the setting to "Disable".
6
Click the [Set] button.
7
In the confirmation screen, click the [OK] button.
The firewall settings are applied.
8
Check the setting completion message and click the [Done] button.
The screen display returns to the [Network] screen.
5.7
RAID Configuration Settings
Use ETERNUS Web GUI to set RAID configurations in the ETERNUS DX.
Perform the following settings:
•
RAID group creation
Volume creation
•
Hot spare registration
•
This section describes the configuration settings using a case of creating the following volumes as an exam-
ple.
Operation volume
•
Create an operation volume (Standard) in RAID1+0(2+2) RAID group.
•
Backup volume
Create a generation management volume (SDV) and temporary work volume (SDPV) in RAID5(4+1) RAID
group.
FUJITSU Storage ETERNUS DX200F All Flash Array Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
48
P3AM-8462-01ENZ0