Fujitsu ETERNUS DX200F Configuration Manual page 85

Chapter 8 SAN Connection Settings
8.1 Connection Settings for the ETERNUS DX
8.1.2.1 iSCSI Host Group Addition
Add the information on the hosts (servers) that access the ETERNUS DX via the host interface port. Create a
host group when adding a host.
A host group is a group of HBAs that have the same host interface and access the same LUN groups.
The procedure to register a host group is as follows:
1
On the navigation of the ETERNUS Web GUI screen, click the [Connectivity] tab.
2
In [Action], click [Add iSCSI Host Group].
The [Add iSCSI Host Group] screen appears.
3
Specify a host group name to be created, and select a host response to be assigned to the host group.
4
Register an iSCSI host in a host group and click the [Add] button.
The following screen shot shows registration of a host by clicking the [Now Connected] tab.
A confirmation screen appears.
5
Click the [OK] button.
The iSCSI host group is added and the registration completion screen appears.
6
Click the [Done] button.
The screen display returns to the [Host Group] screen.
FUJITSU Storage ETERNUS DX200F All Flash Array Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
85
P3AM-8462-01ENZ0