Fujitsu ETERNUS DX200F Configuration Manual page 50

Chapter 5 General Settings
5.7 RAID Configuration Settings
2
In [Action], click [Create].
The [Create RAID Group] screen appears.
3
Enter the name of the RAID group that is to be registered. Select "Manual" for "Create Mode".
4
Set the required items and click the [Create] button.
Name: RG0
Create Mode: Manual
RAID Level: High Performance (RAID1+0)
Controlling CM: Automatic
Drives: Select four
A confirmation screen appears.
5
Click the [OK] button.
The RAID group is registered and the registration completion screen appears.
6
Click the [Done] button.
The screen display returns to the [RAID Group] screen.
7
After creating an operation RAID group, repeat
FUJITSU Storage ETERNUS DX200F All Flash Array Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
Step 1 and later steps to create a backup RAID group.
50
P3AM-8462-01ENZ0