Administrator Settings; Method #3 Quick Setup On The Command Line Interface; Figure 4-7 Quick Setup Completed In Web Manager - Lantronix SLC 8000 User Manual

Administrator Settings

Administrator
Setting
Sysadmin Password To change the password (e.g., from the default) enter a Sysadmin Password of up
Retype Password
6. Click the Apply button to save your entries.

Method #3 Quick Setup on the Command Line Interface

If the SLC 8000 advanced console manager does not have an IP address, you can connect a
dumb terminal or a PC running a terminal emulation program (VT100) to access the command line
interface. (See Connecting Terminals on page
or Telnet to connect to the SLC unit.
By default, Telnet is disabled and SSH is enabled. To enable Telnet, use the

Logging (on page 76).
To complete the command line interface Quick Setup script:
1. Do one of the following:
- With a serial terminal connection, power up, and when the command line displays, press
Enter.
- With a network connection, use an SSH program or Telnet program (if Telnet has been
enabled) to connect to xx.xx.xx.xx (the IP address in dot quad notation), and press
Enter. You should be at the login prompt.
2. Enter sysadmin as the user name and press Enter.
3. Enter PASS as the password and press Enter. The first time you log in, the Quick Setup script
runs automatically. Normally, the command prompt displays.
SLC™ 8000 Advanced Console Manager User Guide
Description
to 64 characters.
Re-enter the Sysadmin Password above in this field as a confirmation.

Figure 4-7 Quick Setup Completed in Web Manager

31.) If the unit has an IP address, you can use SSH
4: Quick Setup
Services > SSH/Telnet/
46