Routing; Dynamic Routing; Figure 6-4 Network > Routing - Lantronix SLC 8000 User Manual

replace <Rule Number>
delete <Rule Number>

Routing

The SLC 8000 advanced console manager allows you to define static routes and, for networks
using Routing Information Protocol (RIP)-capable routes, to enable the RIP protocol to configure
the routes dynamically.
To configure routing settings:
1. Click the Network tab and select the Routing option. The following page displays:
2. Enter the following:

Dynamic Routing

Enable RIP
RIP Version
SLC™ 8000 Advanced Console Manager User Guide
Figure 6-4 Network > Routing
Select to enable Dynamic Routing Information Protocol (RIP) to assign routes
automatically. Disabled by default.
Select the RIP version. The default is 2.
6: Basic Parameters
68