Ldap Commands - Lantronix SLC 8000 User Manual

4. Select or clear the checkboxes for the following rights:
Full Administrative
Networking
Services
Secure Lantronix
Network
Date/Time
Reboot & Shutdown
Local Users
Remote
Authentication
SSH Keys
User Menus
Web Access
Diagnostics &
Reports
Firmware &
Configuration
Internal Modem
Device Port
Operations
Device Port
Configuration
USB
SD Card
5. Click the Apply button.
Note: You must reboot the unit before your changes will take effect.

LDAP Commands

These commands for the command line interface correspond to the web page entries described
above.
To configure the SLC unit to use LDAP to authenticate users who log in via the Web, SSH,
Telnet, or the console port:
set ldap <one or more parameters>
Parameters
adsupport <enable|disable>
Enables or disables active directory.
base <LDAP Base>
bindname <Bind Name>
breakseq <1-10 Chars>
SLC™ 8000 Advanced Console Manager User Guide
Right to add, update, and delete all editable fields.
Right to enter Network settings.
Right to enable and disable system logging, SSH and Telnet logins, SNMP, and
SMTP.
Right to view and manage secure Lantronix units (e.g., SLP, Spider, or SLC
devices) on the local subnet.
Right to set the date and time.
Right to shut down and reboot the SLC unit.
Right to add or delete local users on the system.
Right to assign a remote user to a user group and assign a set of rights to the user.
Right to set SSH keys for authenticating users.
Right to create a custom user menu for the CLI for NIS users.
Right to access Web-Manager.
Right to obtain diagnostic information and reports about the unit.
Right to upgrade the firmware on the unit and save or restore a configuration (all
settings). Selecting this option automatically selects Reboot & Shutdown.
Right to configure internal modem settings.
Right to enter device port settings.
Right to enter device port configurations.
Right to enter modem settings for USB.
Right to view and enter settings for SD card.
11: User Authentication
194