Ip Settings; Manage Files; Figure 9-5 Firmware And Configurations - Manage Files (Top Of Page) - Lantronix SLC 8000 User Manual

IP Settings

Service
Telnet Port
SSH Port
TCP Port
Authenticate
(checkbox)
4. Click Apply.

Manage Files

To manage files, perform the following steps.
1. Click the Manage Files on the Storage Device link on the

Figure 9-5 Firmware and Configurations - Manage Files (Top of Page)

Note: At the bottom of the page, shown in
Rename options.
SLC™ 8000 Advanced Console Manager User Guide
The available connection services for this modem port (None, Telnet, SSH, or
TCP). Only one can be active at a time. The default is None.
Telnet Port Telnet session port number to use if you selected Telnet.
Defaults:
USB Port U1: 2049

USB Port U2: 2050

Range: 1025-65535

The SSH session port number to use if you selected SSH.
Defaults:
USB Port U1: 3049

USB Port U2: 3050

Range: 1025-65535

The TCP (raw) session port number to use if you selected TCP.
Defaults:
USB Port U1: 4049

USB Port U2: 4050

Range: 1025-65535

If selected, the SLC unit requires user authentication before granting access to
the port. Authenticate is selected by default for Telnet Port and SSH Port, but
not for TCP Port.
Figure
Devices > USB > Configure
9-5, are the Delete, Download, and
9: USB/SD Card Port
page.
164