Lantronix SLC 8000 User Manual page 243

The default is 1.
To display all network traffic, applying optional filters:
Note: This command is not available on the web interface.
diag nettrace <one or more parameters>
Parameters
ethport <1|2>
host <IP Address or Name>
numpackets <Number of Packets>
protocol <tcp|udp|icmp>
verbose <enable|disable>
To display information on the internal memory, storage and processes of the SLC 8000
advanced console manager:
diag internals
Note: This command is available on the web interface as SLC Internals under
Maintenance > Diagnostics.
SLC™ 8000 Advanced Console Manager User Guide
12: Maintenance
243