Lantronix SLC 8000 User Manual page 188

3. In the User Rights section, select the user Group to which NIS users will belong:
Group
4. Assign or unassign User Rights for the specific user by checking or unchecking the following
checkboxes:
Full Administrative
Networking
Services
Secure Lantronix
Network
Date/Time
Reboot & Shutdown
Local Users
Remote
Authentication
SSH Keys
User Menus
Web Access
Diagnostics &
Reports
Firmware &
Configuration
Internal Modem
Device Port
Operations
Device Port
Configuration
USB
SD Card
5. Click the Apply button.
Note: You must reboot the unit before your changes will take effect.
SLC™ 8000 Advanced Console Manager User Guide
Select the group to which the NIS users will belong:
Default Users: This group has only the most basic rights. You can specify

additional rights for the individual user .
Power Users: This group has the same rights as Default Users plus Web

Access, Networking, Date/Time, Reboot & Shutdown, and Diagnostics &
Reports.
Administrators: This group has all possible rights.

Right to add, update, and delete all editable fields.
Right to enter Network settings.
Right to enable and disable system logging, SSH and Telnet logins, SNMP, and
SMTP.
Right to view and manage secure Lantronix units (e.g., SLP, Spider, or SLC units)
on the local subnet.
Right to set the date and time.
Right to shut down and reboot the SLC unit.
Right to add or delete local users on the system.
Right to assign a remote user to a user group and assign a set of rights to the user.
Right to set SSH keys for authenticating users.
Right to create a custom user menu for the CLI for LDAP users.
Right to access Web-Manager.
Right to obtain diagnostic information and reports about the unit.
Right to upgrade the firmware on the unit and save or restore a configuration (all
settings). Selecting this option automatically selects Reboot & Shutdown.
Right to update internal modem settings.
Right to control device ports.
Right to enter device port settings.
Right to enter modem settings for USB devices and control USB storage devices.
Right to enter settings for SD card.
11: User Authentication
188