Events Commands - Lantronix SLC 8000 User Manual

slp restart
Syntax
slp restart
Description
Issues the CLI command the SLP uses to restart itself.
slp system
Syntax
slp system
Description
Displays system information for the SLP.

Events Commands

admin events add
Syntax
admin events add <trigger> <response>
<trigger> is one of:
receivetrap, templimit, humidlimit, nomodemdial, or dpdatadrop.
<response> is one of:
action <fwdalltrapseth|fwdseltrapeth> ethport <1|2> nms <SNMP NMS>
community <SNMP Community> [oid <SNMP OID>]
action <fwdalltrapsmodem|fwdseltrapmodem> deviceport <Device Port #
or Name> nms <SNMP NMS> community <SNMP Community> [oid <SNMP Trap
OID>]
action <fwdalltrapsmodem|fwdseltrapmodem> usbport <u1|u2> nms <SNMP
NMS> community <SNMP Community> [oid <SNMP Trap OID>]
action <fwdalltrapsmodem|fwdseltrapmodem> internal modem
nms <SNMP NMS> community <SNMP Community> [oid <SNMP Trap OID>]
action <emailalert> emailaddress <destination email address>
action <syslog>
Description
Defines events.
SLC™ 8000 Advanced Console Manager User Guide
14: Command Reference
301