Safety Compliances; Warranty - Grandstream Networks UCM6102 User Manual

To set up the UCM6116, follow the steps below:
1. Connect one end of an RJ-45 Ethernet cable into the LAN port of the UCM6116;
2. Connect the other end of the Ethernet cable into the uplink port of an Ethernet switch/hub;
3. Connect the 12V DC power adapter into the 12V DC power jack on the back of the UCM6116. Insert
the main plug of the power adapter into a surge-protected power outlet;
4. Wait for the UCM6116 to boot up. The LCD in the front will show the device hardware information
when the boot process is done;
5. Once the UCM6116 is successfully connected to network, the LED indicator for NETWORK in the front
will be in solid green and the LCD shows up the IP address;
6. (Optional) Connect PSTN lines from the wall jack to the FXO ports; connect analog lines (phone and
Fax) to the FXS ports.
SAFETY COMPLIA
NCES
The UCM61xx complies with FCC/CE and various safety standards. The UCM61xx power adapter is
compliant with the UL standard. Use the universal power adapter provided with the UCM61xx package
only. The manufacturer's warranty does not cover damages to the device caused by unsupported power
adapters.

WARRANTY

If the UCM61xx was purchased from a reseller, please contact the company where the device was
purchased for replacement, repair or refund. If the device was purchased directly from Grandstream,
contact our Technical Support Team for a RMA (Return Materials Authorization) number before the
product is returned. Grandstream reserves the right to remedy warranty policy without prior notification.
Warning:
Use the power adapter provided with the UCM61xx. Do not use a different power adapter as this may
damage the device. This type of damage is not covered under warranty.
Firmware Version 1.0.1.22 UCM6102/6104/6108/6116 USER MANUAL Page 19 of 138