Join A Conference Call; Invite Other Parties To Join Conference; Figure 115: Conference Invitation From Web Gui - Grandstream Networks UCM6202 User Manual

Join A Conference Call

Users could dial the conference bridge extension to join the conference. If password is required, enter the
password to join the conference as a normal user, or enter the admin password to join the conference as
administrator.

Invite Other Parties to Join Conference

When using the UCM6200 conference bridge, there are two ways to invite other parties to join the
conference.

Invite from Web GUI.
For each conference bridge in UCM6200 Web GUI->PBX->Call Features->Conference, there is an icon
for option "Invite a participant". Click on it and enter the number of the party you would like to invite.
Then click on "Add". A call will be sent to this number to join it into the conference.

Invite by dialing 0 or 1 during conference call.
A conference participant can invite other parties to the conference by dialing from the phone during the
conference call. Please make sure option "Enable User Invite" is turned on for the conference bridge first.
Enter 0 or 1 during the conference call. Follow the voice prompt to input the number of the party you would
like to invite. A call will be sent to this number to join it into the conference.
0: If 0 is entered to invite other party, once the invited party picks up the invitation call, a permission will be
asked to "accept" or "reject" the invitation before joining the conference.
1: If 1 is entered to invite other party, no permission will be required from the invited party.

Figure 115: Conference Invitation From Web GUI

UMC6200 Series User Manual
P a g e | 176