Done By Authorised Mutoh Technician - MUTOH Blizzard User Manual

5.7 DONE BY AUTHORISED MUTOH TECHNICIAN

An Authorized Mutoh technician should check and replace some components of your printer on a regular
basis (every 6 and 12 months).
Be sure to have these periodical service interventions planned in a timely manner.
It is very important not to skip a maintenance intervention in order to maintain constant print quality and to
keep your warranty.
Please refer to the table below to know what the Authorized Mutoh technician should do.
No° Action
1 Changing the dampers
2 Changing the spitting box + tube + L connection
3 Applying grease on the head up-down cams when needed
4 Applying grease on the Y-motor belt if needed
5 Applying grease on the roller path carriage if needed
6 Applying grease on the capping station cam and gears if needed
7 Changing the pumps
8 Changing the tubes from the pumps to the waste bottle
9 Change wiper arm assembly
10 Changing the maintenance station
Notes
•
A "I
LL CLEANING IN NK AREAS
•
A
BOVE MAINTENANCE CYCLE IS BASED ON USE
8 / , 5
HOURS DAY DAYS
I
F MACHINE IS USED MORE
Available kits for Authorized Mutoh Technicians only and their part numbers:
maintenance cycle Kit 6 months
maintenance cycle kit 12 months
"
MUST BE DONE WITH
:
/ 44 /
WEEK AND WEEKS YEAR
,
MAINTENANCE PERIODS WILL COME EARLIER
Chapter 5: Periodical Maintenance for Blizzard Eco-Solvent Ultra
E -S U C
CO OLVENT LTRA LEANING LIQUID
.
.
KY-81835
KY-81820
71
User's Guide Blizzard
Frequency
Every 6 months
Every 12 months
.
AP-75260 – Rev. 2.1 – 15/01/08