MUTOH Blizzard User Manual page 57

Step 4 : Select which heads should be cleaned with the [F1]-key and which kind of cleaning cycle with the
[F2]. Confirm with the [ENTER]-key
Menu choice
Step 5 : The time necessary is displayed.
Step 6 : Perform another NozzleCheck after the cleaning.
Step 7 : If there are still nozzles missing, perform another cleaning, if not, the printer is ready to print.
Notes
•
W
HEN THERE ARE REPEATEDLY MISSING NOZZLES AFTER SOME CLEANINGS
INK CYCLE IS NOT COMPLETELY AIRTIGHT
M
WIPERS WITH UTOH
Menu Choice Description
ALL* Clean all heads (recommended)
Head 1-2 Only clean head 1 and 2
Head 3-4 Only clean head 3 and 4
Head 5-6 Only clean head 5 and 6
Head 7-8 Only clean head 7 and 8
Little Perform a little cleaning cycle
Normal Perform a normal cleaning cycle
Powerful Perform a powerful cleaning cycle (not recommended)
Start cleaning cycle
. T
O SOLVE THIS
M S
ILD OLVENT CLEANING LIQUID AND PERFORM A NEW CLEANING
Chapter 4: Periodical Maintenance for Blizzard Mild Solvent
,
,
MOISTEN THE SIDES OF THE CAPS AND CLEAN THE
57
User's Guide Blizzard
IT COULD BE POSSIBLE THAT THE
.
AP-75260 – Rev. 2.1 – 15/01/08