MUTOH Blizzard User Manual page 79

Prints the uni-directional test pattern. The two-
coloured lines should be in one perfect line.
If not, contact an Authorized Mutoh technician to
readjust the heads.
Prints the bi-directional test pattern at 300 cps,
for head height 1, 2 and 3.
Every block should be checked for stair case
effects. In case this symptom occurs, contact an
Authorized Mutoh technician to readjust the
heads.
For when printing in 720 dpi.
Prints the bi-directional test pattern at 300 cps,
for head height 1, 2 and 3.
Every block should be checked for stair case
effects. In case this symptom occurs, contact an
Authorized Mutoh technician to readjust the
heads.
For when printing in 540 dpi.
SAME PATTERN
Prints the bi-directional test pattern at 300 cps,
for head height 1, 2 and 3.
Every block should be checked for stair case
effects. In case this symptom occurs, contact an
Authorized Mutoh technician to readjust the
heads.
For when printing in 360 dpi.
SAME PATTERN
79
User's Guide Blizzard
Chapter 6: Preparations before printing
AP-75260 – Rev. 2.1 – 15/01/08