Done By Authorised Mutoh Technician - MUTOH Rockhopper 3 Extreme Operation Instructions Manual

4.2 DONE BY AUTHORISED MUTOH TECHNICIAN

An Authorized Mutoh technician should check and replace some components of your printer on frequent
base (every 6 and 12 months).
Be sure to remind your distributor when the replacements should be done.
It is very important not to skip a maintenance intervention in order to maintain constant print quality and to
keep your warranty.
Please refer to the table below to know what the Authorized Mutoh technician should do.
No° Description
1 Changing the dampers
2 Changing the spitting box + tube + L connection
3 Applying grease on the head up-down cams when needed
4 Applying grease on the Y-motor belt if needed
5 Applying grease on the roller path carriage if needed
6 Applying grease on the capping station cam and gears if needed
7 Removing dust in the fan area underneath the print platform
8 Changing the pumps
9 Changing the tubes from the pumps to the waste bottle
10 Changing the maintenance station
Notes
•
All cleaning in "Ink areas" must be done with Mutoh water based cleaning solution.
•
Above maintenance cycle is based on use:
8 hours / day, 5 days / week and 44 weeks / year.
If machine is used more, maintenance periods will come earlier.
Operation Instructions Rockhopper 3 Extreme
CHAPTER 4 : PERIODICAL MAINTENANCE
45
Frequency
Every 6 months
Every 6 months
Every 6 months
Every 6 months
Every 6 months
Every 6 months
Every 6 months
Every 12 months
Every 12 months
Every 12 months
AP-77150 – Rev. 1.1 – 05/04/07