Step 6 :
Flush the caps with Mutoh Eco-Solvent Ultra cleaning liquid.
Start a TubingFlush in SetupMenu 6/7.
►
The head will unlock and following message will be displayed:
►
Wait until the pumps start operating.
►
Open the front cover.
►
Inject cleaning liquid in cap 1-4 (Cycle 1) by way of a pipette until the caps does not change
►
colour. Be careful not to spoil cleaning near the caps.
When done, press the ENTER key and inject cleaning in cap 5-8 (Cycle 2) by way of a
►
pipette until the caps does not change colour.
When done, press the ENTER key to END the TubingFlush.
►
Step 7 :
Clean the edges of the caps with a cleaning swab and the area around it with a polyknit wiper. If
necessary use some Mutoh Eco-Solvent Ultra cleaning liquid.
Step 8 :
Close the front cover.
Chapter 5: Periodical Maintenance for Blizzard Eco-Solvent Ultra
62
User's Guide Blizzard
AP-75260 – Rev. 2.1 – 15/01/08