Sheetsize Menu; Topfeed Menu - MUTOH Blizzard User Manual

7.6.4.2

SheetSize menu

When loading a sheet of media, set the method for detecting the size of the media.
Setup items Parameters
SheetSize
-
7.6.4.3

TopFeed menu

Set the amount of media to be fed when printing begins. Make this setting when using roll media.
Setup items Parameters
Top feed 0mm - 400mm
Description
Auto Media measurement sequence ► REAR – RIGHT – LEFT – TOP
Media measurement sequence ► RIGHT – LEFT – TOP
Media orientation when loading standard size media.
Length
Media measurement sequence ► RIGHT – LEFT – TOP
Media orientation when loading standard size media.
Width
After setting, shift to the previous hierarchy menu.
Description
To feed media at the start of printing. Set when
printing on roll media.
• [F2] key: to increase the setup value.
• [F4] key: to decrease the setup value.
• [ENTER] key: to confirm the setup value
• [CANCEL] key: to cancel the setup value
107
User's Guide Blizzard
Chapter 7: Printer menu
AP-75260 – Rev. 2.1 – 15/01/08