Longstore (Only For Mild Solvent Series); Procedure For Longstore; Starting Up After A Longstore - MUTOH Blizzard User Manual

3.8 LONGSTORE (ONLY FOR MILD SOLVENT SERIES)

When transporting your printer or leaving your printer unattended for five days or more, for example on
holidays, it is highly recommended to LongStore the printer in order not to damage the heads and/or the
complete ink system. This means that the complete ink channel system will be filled with Mutoh Mild Solvent
cleaning liquid.

3.8.1 Procedure for LongStore

Be sure to ...
... perform the weekly maintenance
... perform the daily maintenance
... moisten the caps
before starting to LongStore procedure
Go to the LongStore menu (SetupMenu 5/7 ► InkManager 2/2 ► LongStore ► F2)
The process consists of several cleaning loadings and several air loadings. On the display of the operation
panel a time indication is mentioned on the fourth line.
Message
Notes
W
HEN A CLEANING CASSETTE IS EMPTY DURING
. O
IT BY A NEW ONE NLY THE LAST CYCLE WILL BE REPEATED
MENTIONED AGAIN ON THE PANEL

3.8.2 Starting up after a LongStore

Step 1 : Power ON the machine.
Step 2 : Go to H. Unlock (SetupMenu 6/7 ► H. Unlock ► Yes ► F2).
Step 3 : Moisten the caps with Mutoh Mild Solvent cleaning liquid.
Step 4 : Remove the Mutoh cleaning cassettes.
Step 5 : Insert Mutoh Mild Solvent Ink Cassettes in the correct order.
Step 6 : Perform an Ink Load.
Step 7 : Perform a nozzle check an necessary cleanings until all nozzles are present.
Step 8 : Ready to print.
1. Please remove cart.
2. Please wait sucking air
3. Please insert new Mild Solvent cleaning
4. Power OFF
L
ONG
.
S ,
TORE PROCEDURE REMOVE THE EMPTY ONE AND REPLACE
. A
LTHOUGH
43
User's Guide Blizzard
Chapter 3: Basics
Duration
19
, (19
THE FULL TIME MINUTES
AP-75260 – Rev. 2.1 – 15/01/08
)
IS