Onlinetimer Menu; Layout Menu; Joint Menu - MUTOH Blizzard User Manual

7.7.2.1

OnlineTimer menu

When sending data to the printer, it might be possible that the data transfer is interrupted. The printer will
wait, depending on the set online timer, to consider the data transfer as finished. The printer will print the
received data. It is recommended to disable (OFF) this feature. The printer will wait until the rest of the data
is received.
Setup items Parameters
OnlineTimer OFF – 800 sec

7.7.3 Layout menu

Makes various settings on layout function.
Notes
•
T
HE LAYOUT FUNCTION AUTOMATICALLY DETERMINES THE SIZE OF PRINTING DATA SENT FROM THE COMPUTER
AND THEN DETERMINES THE AMOUNT OF ROLL MEDIA REQUIRED WITHOUT WASTING MEDIA
•
I
F SHEET MEDIA HAS BEEN LOADED
Setup items Parameters
Layout Joint
CutPos
-
7.7.3.1

Joint menu

To set joint printing.
Setup items Parameters
Joint Off
On
-
Description
To change the Online time out time by operating the
following keys.
• [F2] key: to increase the setup value.
• [F4] key: to decrease the setup value.
• [ENTER] key: to confirm the setup value
• [CANCEL] key: to cancel the setup value
,
THE LAYOUT FUNCTION IS DISABLED
Description
Makes settings for stitching print.
To set the media cutting position after printing has been completed.
[CANCEL] key: To shift to the previous hierarchy menu.
Description
Does not perform stitch printing
Performs stitch printing
[CANCEL] key: shift to the previous hierarchy menu.
115
User's Guide Blizzard
Chapter 7: Printer menu
.
.
AP-75260 – Rev. 2.1 – 15/01/08
,