Weekly Maintenance - MUTOH Blizzard User Manual

4.3 WEEKLY MAINTENANCE

At the end of the week, ink has to be removed from some parts, so it cannot harden. Otherwise, some parts
will break down or cause bad print quality. After performing a weekly maintenance, do not forget to perform
the daily maintenance ass well.
Step 1 : Power ON the printer, go to the "H. Unlock menu" and press [F2].
This will cause the unlocking of the carriage.
►
Step 2 : Open the front cover.
Step 3 : Clean the area around the caps with a polyknit wiper. If you see ink, dust or something else,
clean it immediately so it cannot influence the print quality.
Step 4 : Open the left maintenance cover.
Chapter 4: Periodical Maintenance for Blizzard Mild Solvent
49
User's Guide Blizzard
AP-75260 – Rev. 2.1 – 15/01/08