Menu Overview (1/7-7/7) - MUTOH Blizzard User Manual

7.5 MENU OVERVIEW (1/7-7/7)

This section explains which kind of settings can be made via the printer interface. Find below an overview of
all Setup Menus.
F1 Ink/ChipStatus
F2 OriginSet
F3 TestPrint
F4 MediaSet
F1 PrintMode
F2 Command
F3 Layout
F4 Function
F1 RollSetup
F2 Centro.
F3 Network
F1 Utility
F3 Initial
F1 DataDump
F2 InkManager
F1 H. Unlock
F2 WiperClean
F3 TankChg.
F4 TubingFlush
F1 VersionCheck
F2 Area
98
User's Guide Blizzard
Chapter 7: Printer menu
Check the ink left in each cassette /
smart chip management system
Set the printing start position
Make several test prints
Set media details
Set Print Mode details
Make layout settings
Make function settings
Set roll details
Set centronics communication mode
Set network details
Make advanced utility settings
Return parameters to factory default
For Authorized Mutoh technicians only
Set ink details
Unlock the head
Unlock the head to clean the wipers
Replace tank procedure
Flush the tubings
Check which firmware version is
installed
Check printed area in m²
AP-75260 – Rev. 2.1 – 15/01/08