Head Cleaning - MUTOH Blizzard User Manual

5.6.3 Head cleaning

It might be possible that some nozzles are lost. This can happen before starting a print or during printing. If
this phenomenon occurs, perform a head cleaning. Depending on the amount of nozzles lost, a little, normal
or powerful cleaning can be performed.
Please follow the procedure below to perform a NozzleCheck and Cleaning:
Step 1 : Go to SetupMenu 1/7 ► TestPrinting (F3) ► NozzleCheck (F2).
Step 2 : Analyze the test pattern and perform eventual cleanings. Above the pattern, numbers are printed.
These numbers corresponds with the head number.
8 8
Step 3 : Press the F2 key in the main screen to open the cleaning menu.
7 7 6 6
Chapter 5: Periodical Maintenance for Blizzard Eco-Solvent Ultra
5 5 4 4
69
User's Guide Blizzard
3 3 2 2
AP-75260 – Rev. 2.1 – 15/01/08
1 1