4.2 DONE BY AUTHORISED MUTOH TECHNICIAN
An Authorized Mutoh technician should check and replace some components of your printer on frequent
base (every 6 and 12 months).
Be sure to remind your distributor when the replacements should be done.
It is very important not to skip a maintenance intervention in order to maintain constant print quality and to
keep your warranty.
Please refer to the table below to know what the Authorized Mutoh technician should do.
N°
Action
10
Change dampers
11
Change pumps (*)
12
Change tubes from pumps -> Waste bottle
13
Change spitting box + tube + L connection
14
Change capping station
15
Change cap assembly maintenance station
16
Apply grease on head up-down cams when needed
17
Apply grease on Y-motor belt when needed
18
Apply grease on roller path – carriage when needed (**)
19
Apply grease on capping station camm + gears when needed
20
Dust removal in fan area underneath print platform
Maintenance
Cycle
1
10
11
12
13
14
15
16
17
18
19
20
Notes
•
All cleaning in "Ink areas" must be done with Spitfire Mild Solvent cleaning.
•
Above maintenance cycle is based on use:
8 hours / day, 5 days / week and 44 weeks / year.
If machine is used more, maintenance periods will come earlier.
Available kits for Authorized Mutoh Technicians only and their part numbers:
maintenance cycle Kit 6 months
maintenance cycle kit 12 months
2
3
4
Operation Instructions Spitfire 65/90 Extreme
CHAPTER 4 : PERIODICAL MAINTENANCE
Month
5
6
7
x
x
x
x
x
x
x
x
x
x
KY-80226
KY-80227
47
8
9
10
AP-77140 – Rev. 1.1 – 05/04/07
11
12
x
x
x
x
x
x
x
x
x
x