Done By Authorised Mutoh Technician - MUTOH Spitfire 100 Extreme Operation Instructions Manual

4.2 DONE BY AUTHORISED MUTOH TECHNICIAN

This section describes the periodical services which should ONLY be done by an Authorised Mutoh
Technician. This periodical service ensures stable printout quality of the machine.
Perform periodical inspections according to the table below.
NR DESCRIPTION
13 Change absorbent in maintenance station
14 Change dampers
15 Change waste tubing from collector > waste bottle
16 Change spitting box + tube + L connection
17 Apply grease on head up-down cams
18 Apply grease on Y-motor belt
19 Apply grease on roller path carriage
20 Apply grease on capping station cams+ gears
21 Change maintenance station
22 Change cap assembly maintenance station
Notes
•
All cleaning in "Ink areas" must be done with Mutoh water based cleaning solution.
•
Above maintenance cycle is based on use:
8 hours / day, 5 days / week, 44 weeks / year.
If machine is used more, maintenance periods will come earlier.
Available kits for Authorized Mutoh Technicians only and their part numbers:
maintenance cycle Kit 6 months
maintenance cycle kit 12 months
Spitfire 100 Extreme series printers – Operation Instructions
Frequency
6 monthly
6 monthly
6 monthly
6 monthly
6 monthly
6 monthly
6 monthly
6 monthly
yearly
After 6 months
KY-80236
KY-80237
57
CHAPTER 4: PERIODICAL MAINTENANCE
AP-77200, Rev. 1.1, 05/07/07