5.2 DONE BY AUTHORIZED MUTOH TECHNICIAN
This section describes the periodical part replacements and the periodical inspections required for this
printer.
These periodical services ensure the stable printing quality of the printer.
5.2.1 Periodical replacement of parts
Perform periodical replacements according to the table below. These replacements should be executed by
an authorized Mutoh technician. These replacements are necessary to ensure the best printing quality
output.
5.2.2 Periodical Inspection Part List
Perform periodical inspections according to the table: "Periodical Inspection Part List" and perform cleaning
and part replacement as necessary.
Part
Media guide L
Sub platen front surface
Timing fence
(CR encoder detection slit plate)
Rail on the CR guide frame
P_REAR sensor front surface
Part
Maintenance station
Wiper
Damper
Timing
Once year
Once year
Once year
Once year
Once year
Once year
Once year
Check point
•
Media dust accumulation
•
Foreign objects
•
Damages
•
Media dust accumulation
•
Foreign objects
•
Damages
•
Foreign objects
•
Media dust accumulation
•
Foreign object
107
AP-75740 – Rev 1.1 – 23/01/2007
User's Guide ValueJet 1204
Chapter 4: Handling the printer
Timing