Print And Wipe Menu; Smarttop Menu; Autocleaning Menu - MUTOH Blizzard User Manual

7.9.1.4

Print and Wipe menu

ONLY FOR BLIZZARD ECO-SOLVENT UTLRA SERIES PRINTERS.
To take care of possible condensation on the head nozzle plate, it is possible to wipe while printing.
Setup items Parameters
Smart Top Off
High
Middle
Low
-
7.9.1.5

SmartTop menu

This feature will take care of a feed of 5 centimetres before every print. To start printing on media which is
pre heated. This function will only be visible when the B heater is activated.
Setup items Parameters
Smart Top Off
On
-
7.9.1.6

AutoCleaning menu

In normal printing conditions, it is not recommended to use this function. When experiencing regular nozzle
loss, one of the three AutoCleaning features can be used.
When using this function, the wiping activity will be much higher, so be sure to securely perform your daily
and weekly maintenance.
Setup items Parameters
Auto Clean Waiting
Printing
Before Printing
-
Description
No wiping during printing
After printing 10 passes, wiping cycle will be performed.
After printing 16 passes, wiping cycle will be performed.
After printing 22 passes, wiping cycle will be performed.
[CANCEL] key: shift to the previous hierarchy menu.
Description
No media feed of 5 centimetres
A media feed of 5 centimetres
[CANCEL] key: shift to the previous hierarchy menu.
Description
To perform a little, normal, powerful cleaning while printer is idle
for 0,5; 1; 2; 3; 4; 5; 6; 9; 12; 18 or 24 hours.
To perform a little, normal, powerful cleaning after 30, 60, 90,
120, 180 minutes of printing.
To perform a little, normal, powerful a cleaning before every job
[CANCEL] key: shift to the previous hierarchy menu.
122
User's Guide Blizzard
Chapter 7: Printer menu
AP-75260 – Rev. 2.1 – 15/01/08