Error Requiring A Restart - MUTOH Blizzard User Manual

Hide thumbs Also See for Blizzard:
Table of Contents

Advertisement

No.
Message
1
command status MH** Error [ ]
Notes
*** I
N ERROR MESSAGES ARE CODE NUMBERS INDICATING WHAT KIND OF ERROR OCCURRED
[ ]
MAY INDICATE THE COMMAND CODE OF THE ERROR
F
OR THE SETTINGS ON A COMPUTER

8.3.5 Error requiring a restart

Following are descriptions and solutions requiring a restart.
Errors requiring a restart are displayed when the following fatal error has occurred during printer operation:
Foreign material disturbing the printer operation is involved in the printer.
An electrical circuit (such as board, motor, or sensor) failure has occurred.
An error on the control program has occurred.
If an error requiring a restart has occurred, the printer prints and then stops (see below).
(1) Power relating to the driving system is shut off automatically.
(2) All indicator lights on the operation panel are switched ON and beeps sound continuously.
(3) An error message is displayed on the operation panel.
Press any key on the operation panel to stop the beep sounds.
If an error requiring a restart has occurred, solve the problems to restart the printer and delete the error.
If the same error message is displayed again, contact your local MUTOH dealer. Be sure to inquire the code
numbers of the error messages.
No.
Message
1
E System error***
[ ]
Notes
*** I
N ERROR MESSAGES ARE CODE NUMBERS INDICATING WHAT KIND OF ERROR OCCURRED
[ ]
MAY INDICATE THE COMMAND CODE OF THE ERROR
F
OR THE SETTINGS ON A COMPUTER
Descriptions
Invalid command data has been
sent from computer.
.
,
REFER TO THE COMPUTER
Descriptions
An error which cannot be solved
promptly has occurred.
.
,
REFER TO THE COMPUTER
140
Make sure that the settings of
the computer and the printer
match.
'
S OPERATION MANUAL
Solutions
1. If foreign materials such as a piece
of media or media dust are involved in
the driving system, remove them.
2. Make sure that the replaced parts
are correctly installed.
3. Power OFF the printer.
seconds or more, power it back ON.
'
.
S OPERATION MANUAL
User's Guide Blizzard
Chapter 8: Troubleshooting
Solution
.
.
After 10
.
AP-75260 – Rev. 2.1 – 15/01/08

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents