F2] - Cleaning The Heads - MUTOH Blizzard User Manual

7.2.2 [F2] - Cleaning the heads

When there are some missing nozzles, a cleaning should be done. Depending on the quantity of missing
nozzles and which head, a little, normal or powerful cleaning on head 1-2, head 3-4 or ALL could be done.
Step 1 : Verify the following regarding the condition of the printer.
It is not currently printing
►
Step 2 : Press the [F2] key of the operation panel.
To shift to the cleaning menu.
►
Step 3 : Press the [F1] key or the [F2] key on the operation panel.
The product will perform following operations:
►
Setup items Key name
Cleaning
F1
F2
ENTER
Step 4 : Press the [ENTER] key to start the requested cleaning.
Parameters
ALL
Head 1-2
Head 3-4
Head 5-6
Head 7-8
Little
Normal
Powerful
Start the cleaning cycle
90
Description
Clean all heads
Only clean head 1 and 2
Only clean head 3 and 4
Only clean head 5 and 6
Only clean head 7 and 8
Perform a little cleaning
Perform a normal cleaning
Perform a powerful cleaning (not recommended)
User's Guide Blizzard
Chapter 7: Printer menu
AP-75260 – Rev. 2.1 – 15/01/08