Transferring Ink Volume - MUTOH Blizzard User Manual

3.6.3 Transferring ink volume

When there is no SmartChip card inserted in the card reader, the management system will ask to scan all the
cassette slots and transfer the rest ink volume from the SmartChip on the cassette to the management
system.
Step 1 : Press the ENTER key to scan all slots.
Step 2 : If ink value is detected on one of the SmartChips, the following message will be displayed:
Press the ENTER key to transfer or the CANCEL key to abort.
If there is no ink volume detected, the following message will be displayed:
Step 3 : The management system will scan until it found a SmartChip with ink volume. Repeat this
procedure until no ink volume is found anymore.
41
User's Guide Blizzard
Chapter 3: Basics
AP-75260 – Rev. 2.1 – 15/01/08