Daily Maintenance - MUTOH Blizzard User Manual

Caution
B
E SURE TO WEAR GLOVES AND GOGGLES DURING THE MAINTENANCE

4.2 DAILY MAINTENANCE

If some nozzles are missing or misfiring, perform cleaning cycles until all nozzles are in good shape. We
advise to run a normal or a powerful cleaning cycle to recover the nozzles.
At the beginning of the day, be sure to clean the wipers. This is required to make the wipers more elastic
and to be sure that all dried ink particles are gone before the first wipe in the morning. Please see below to
know how to clean the wipers.
At the end of the day, when you will shut down the printer, the ink also needs to be removed from other
parts, so it cannot harden. Otherwise, some parts will break down or cause bad print quality.
Notes
I
N THE BOX YOU WILL FIND A
6 . I
FOR MONTHS N CASE YOU
PRODUCT CODE OF THE GOOD SHAPE KIT IS
Step 1 : Power ON the printer and go to the "WiperClean-Menu" in SetupMenu 6/7 and press [F2]
I) This will cause the unlocking of the carriage.
Step 2 : Open the front cover.
Step 3 : Clean the wipers with a polyknit wiper. Use some Mutoh Mild Solvent Cleaning Liquid to remove
the ink.
Step 4 : Close the front cover
Step 5 : Press the ENTER key to make the carriage go back to its home position.
G S K
OOD HAPE IT TO PERFORM THE DAILY MAINTENANCE
' ,
RE OUT OF STOCK YOU CAN ORDER A NEW KIT WITH YOUR LOCAL DEALER
KY-80228.
Chapter 4: Periodical Maintenance for Blizzard Mild Solvent
.
47
User's Guide Blizzard
. N
ORMALLY THIS IS ENOUGH
. T
AP-75260 – Rev. 2.1 – 15/01/08
HE