Replacing The Wipers - MUTOH Blizzard User Manual

5.4.2 Replacing the wipers

Step 1 : Power ON the printer, go to the "H. Unlock menu" and press [F2].
This will cause the unlocking of the carriage.
►
Step 2 : Open the front cover.
Step 3 : Remove the old wipers with a pair of tweezers.
Step 4 : Before inserting a new wiper, moisten the wiper with Mutoh Eco-Solvent Ultra Cleaning Liquid.
Step 5 : Insert the moistened wiper with a pair of tweezers.
Step 6 : Close the front cover and press the ENTER key when done. The carriage will automatically go to
its home position.
Notes
D
O NOT TOUCH THE WIPERS WITH YOUR BARE HANDS TO AVOID GREASE OR DIRT TO GET IN CONTACT WITH THE
WIPERS AND AUTOMATICALLY THE NOZZLE PLATE
APPROPRIATE CLEANING LIQUID IN CASE OF DIRT
Chapter 5: Periodical Maintenance for Blizzard Eco-Solvent Ultra
Be sure to insert the wiper
correctly as shown below:
When standing in front of
the machine.
. U
SE A PAIR OF TWEEZERS TO AVOID THIS
.
66
User's Guide Blizzard
Be sure that the wiper clicks in the
wiper holder!
. C
LEAN WIPERS WITH
AP-75260 – Rev. 2.1 – 15/01/08