Checking The Image Quality; Setting The Country/Region; Setting The Date And Time - Canon iR2030 Series Service Manual

1) Attach the ferrite core [2] to the user's USB cable, and then connect the
USB cable to the USB port of the host machine.
To reduce noise, attach the ferrite core as close to the USB port of the host
machine as possible.

2.2.6 Checking the Image Quality

1) Plug the power cord into the outlet, and then turn on the main power
switch [2].
Supply of toner will start after the initial rotation. After a few minutes,
supply of toner finishes and the machine stops automatically.
Use the specified power supply (rated voltage -/+10% and rated current).
2) Place a document on the document glass, take a copy of it by supplying
paper from the cassette or manual feed tray, and check the printed image.
Also perform the following checks:
- Check whether abnormal sound is heard.
- Check the printed images at all preset magnifications.
- Check whether the document is copied normally on the specified
number of sheets.

2.2.7 Setting the Country/Region

1) Press the following keys to display the service mode screen:
> 2 Key > 8 Key >
2) Select "# CLEAR" using or
3) Select "TYPE" using or
4) Using or , select the country/region type that conforms to the com-
munication standard used in the country/region where the machine is
used.
5) Press the OK. When "Please Wait" disappears, the selected country/region
type takes effect.

2.2.8 Setting the Date and Time

1) Press key to display the user mode screen.
2) Select "TIMER SETTINGS" and then press the OK.
3) Select "DATE&TIME SETTING", and then press the OK. The set date
and time appears.
4) Enter the current date and time with the ten keys.
5) Press the OK to allow the entered date and time to take effect.
[1]
[2]
F-2-30
[1]
[2]
F-2-31
, and then press the OK.
, and then press the OK.
0017-5531
0017-5533
0017-5535
Chapter 2
2-7