Installing The Toner Bottle - Canon iR2030 Series Service Manual

Chapter 2
5) While holding the protective cover, insert the new drum unit [1] into the
iR body.
MEMO:
The protective cover will not be reused.
6) Turn the developer pressure release lever [1] counterclockwise, and then
close the left door [2].
[2]
[1]
7) Enter the date in the drum counter label [1].
8) Affix the drum counter label [1] on the drum unit.
2-4
[1]
F-2-10
F-2-11
[1]
F-2-12
[1]
F-2-13
9) Close the front cover [1].
[1]

2.2.3 Installing the Toner Bottle

The image density may be slightly lower than usual on the first approx. 100
sheets printed after installation of the machine.
Therefore, perform the steps mentioned in <Going through the Developer
Idling Mode> (provided after step 6 in this section) before installing the
toner bottle.
1) Shake the toner bottle 5-6 times.
2) Open the front cover [1].
3) Insert the toner bottle.
F-2-14
F-2-15
[1]
F-2-16
F-2-17
0017-5527