Installing The Cassette Heater - Canon iR2030 Series Service Manual

Chapter 2

2.8.2 Installing the Cassette Heater

1) Turn off the main power switch [1] of the host machine and disconnect the
power plug [2] from the outlet.
2) Remove the rear cover [1].
- Screws [2], 4 pcs.
3) Install the wire saddle (large) [1], edge saddle [2], and wire saddle (small)
[3].
Install the wire saddle [3] on the molded part side.
[3]
2-26
[2]
[1]
F-2-89
[2] [1]
F-2-90
4) From the rear of the host machine, insert the cassette heater [1] in the slot
[2] in the host machine.
0017-5563
When installing the cassette heater, exercise care so that the
harness is caught in other parts.
5) Secure the cassette heater [1].
- Screw [3], 1 pc.
6) Pass the cassette heater harness [4] in the wire saddle (large) [5], edge sad-
dle [6], and wire saddle (small) [7].
7) Connect the connector of the cassette harness to the connector [8].
Route the cassette heater harness [4] behind the harness [9].
[2]
[1]
[2]
8) When attaching the cassette heater to the first optional cassette [1], per-
form step 9 after attaching it.
[1]
[1]
[8] [7] [6]
[9]
F-2-91
[2]
[1]
[3]
[5] [4]