Download (Download); Download; Initialization Of Set Value (Clear); Clear - Canon iR2030 Series Service Manual

Chapter 15

15.15 Download (DOWNLOAD)

15.15.1 Download

The following parts of this unit can be upgraded by executing download mode using the service support tool (SST) (for more information, see the "Upgrading"
section):
Main unit
- Flash ROM (system + boot) mounted on the image processor PCB
Accessory
- ROM mounted on the finisher controller PCB
- ROM mounted on the PCL board

15.16 Initialization of Set Value (CLEAR)

15.16.1 Clear

Group
TEL & USER DATA
SERVICE DATA
COUNTER
TYPE
SOFT-CNT
HST
CARD
ERR
PWD
FILE SYSTEM*1
FORMAT*1
CA-KEY
ERDS-DAT
ALL
*1 Only for the touch panel model.

15.17 Error Display (ERROR DISPLAY)

15.17.1 Error Display

An error code is displayed when a service error has occurred. The E code is displayed in the upper step, and the detail code is displayed the bottom step.
15-42
Item
Clears all user-registered and -set areas of telephone registration data and user data.
(Telephone registration refers to the registration of codes on one-touch dialing,
abbreviated dialing, and group dialing.)
Clears the system dump list, except for counters and clear dates.
Clears the maintenance counter, parts counter and mode-specific counters.
Initializes the counter (numerator) in the system dump list.
Initializes user data and service data to suit specified destination settings.
Not used
ACTIVITY Initializes the activity report
ACCOUNT Clears print histories.
JAM Clears the jam history.
ERR Clear the error (error code) history.
ALARM Clears the alarm history.
ENVIROMENT Initializes the enviroment log data.
Clears department management information held in the controller before the card
reader is demounted.
E355 Not used
E719 Clears card reader errors.
Clears the system administrator's password.
Delete unnecessary language files in the USB memory.
USB MEMORY Format the USB memory. (This mode is used when the USB memory error is damaged
and E744 occurs.)
LICENSE Not used
DRIVE
Initializes an installed CA certification.
The settings related to e-RDS are cleared to the factory settings.
Clears user and service data (except for some scan parameters and print parameters),
and the counter setting/registration data in the system dump list, except for the print
count.
Explanation
0017-6182
0017-6183
0017-8542