Attaching The Ferrite Core - Canon iR2030 Series Service Manual

Chapter 2
4) Turn the lever [1] of the paper front guide counterclockwise to release it.
Slide the paper front guide [2] to fit to the size of the paper to be used, and
then turn the lever clockwise to lock it.
[2]
5) Turn the paper trailing edge registration plate [1] to the left to remove it.
Re-attach it to fit to the size of the paper to be loaded.
6) Slide the paper size detection lever [1] to fit to the paper size.
2-6
[1]
F-2-24
[1]
F-2-25
[1]
F-2-26
7) Affix the cassette size label [1] to the paper size indication plate [2].
A4
[1]
8) Affix the caution sheet printed in an appropriate language.
[1]
9) Align the left, right, and leading edges of sheets and load the stack of paper
[1] in the cassette. Make sure that the paper is below the claws [2] of the
cassette.
MEMO:
Inserting the cassette into the machine with the inner plate locked into the
cassette will unlock the inner plate automatically. If the inner plate is not
locked, press the "PUSH DOWN" mark on the inner plate to lock it into the
cassette and then load paper.
[2]
10) Holding the knob at the center of the cassette, insert the cassette in the
machine it stops.

2.2.5 Attaching the Ferrite Core

The installation of the ferrite core does only for the model equipped with the
printer function.
[2]
F-2-27
F-2-28
[1]
F-2-29
0017-5530