Removing The Left Door (With Duplex Unit Type) - Canon iR2030 Series Service Manual

2) Open the left door until it sops and pull out the hinge shaft [1].
MEMO:
When a duplex unit (option) is installed, remove it before pulling out the
hinge shaft for each access.
[1]
3) Lift the left door with both hands to release it from the door rotation shaft
[1], and then remove the left door.
[1]

9.4.13.2 Removing the Left Door (With Duplex Unit Type)

1) Draw out the drum unit.
2) Detach the rear cover.
3) Detach the left cover (rear).
F-9-54
F-9-55
4) Disconnect the relay harness [2] from the connector [1]of the duplex unit
harness.
5) Disconnect the ground cable [3].
- Screw [4], 1 pc.
6) Remove the reusable band [5] from the duplex unit harness at the rear-left
of the main body, and then return the duplex unit harness [6] to the left
door side.
4) Release the duplex unit harness [1].
- Screw [2], 1 pc.
- Connector [3], 1 pc.
- Reusable band [4], 1 pc.
- Wire saddle [5], 1 pc.
[3]
0017-8757
[5] [3] [4]
F-9-56
[2]
[1]
[4] [5]
F-9-57
Chapter 9
[6]
[1]
[2]
9-13