Installing The Reader Heater Harness - Canon iR2030 Series Service Manual

2.7.2 Installing the Reader Heater Harness

1) Turn off the main power switch [1] of the host machine and disconnect the
power plug [2] from the outlet.
2) Open the front cover [1].
[1]
3) Remove the rear cover [1].
- RS tightening screws (M3 x 8)[2], 4 pcs.
4) Remove the rear-left cover [2].
- RS tightening screws (M3 x 8)[2], 1 pc.
[2]
[1]
[2]
[1]
F-2-68
F-2-69
F-2-70
5) Open the core [1] on the rear side of the host machine. Disconnect the two
leader flexible cables [3].
6) Detach the flexible cable guide [5].
0017-5558
- Screws [4], 3 pcs.
7) Release the harness [6] from the three wire saddles [7] and one edge sad-
dle [8].
8) Disconnect the leader flexible cable cover [9].
- Screw [10], 2 pcs.
[10]
[2]
[1]
[2]
[8]
[7]
[6]
[9]
[3]
[1]
F-2-71
Chapter 2
[4]
[5]
2-19