Erds Parameter Settings (E-Rds); Settings Related To E-Rds; Display Of Counter Information (Counter) - Canon iR2030 Series Service Manual

Reference:
At procedure (4) when indicating the license option, it indicates ' 001 1'. The last digit '1' shows that the license is active.
After transmitting the license the last digit will change to '2', which means that the license has been transmitted.
If the option is standard equipped, the last digit will indicate '3', which means that the license could not be transmitted.
(8) Contact the dealer and inform the function inactive certificate key, serial number of the transmission origin device, and serial number of new transmiting device,
which is necessary to transmit the license.
Upon given information above, new license key will be issued, which the license could be registered to the new transmitting device.
(9) Register the new license key to the transmitted device and confirm that the function is active.

15.12 eRDS Parameter Settings (E-RDS)

15.12.1 Settings Related to e-RDS

Settings related to e-RDS are described below.
Item
E-RDS SWITCH
RGW-ADDRESS
RGW-PORT
COM-TEST
COM-LOG

15.13 Display of Counter Information (COUNTER)

15.13.1 Counters
This copier is furnished with a maintenance/supplies counter set (DRBL-1), which can be used to gain rough measures of when to replace supplies. The counter
set increments by one on counting each sheet of small-sized paper (up to A4/LTR) and by two on counting each sheet of large-sized paper (larger than A4/LTR).
Maintenance counter list
Item
TOTAL (Total counter)
PICK-UP (Paper pickup counter)
FEEDER (Feeder related counters)
Description
e-RDS OFF/ON setting (0:OFF / 1:ON)When used (ON), the counter information and error information are sent
to UGW.Default: 0 (OFF)
URL of UGWDefault: URL of actual UGWCharacter string length: 129 bytes (including NULL, one-byte codes
only)
Port No. of UGW Default: 443Setting range: 1 to 65535
Execution of communication test An attempt is made to connect to UGW, judges whether connection is
successful, and displays "COM-TEST OK" or "COMTEST NG" as the judgment result.
Details of communication test resultThe log of errors in communication with UGW is displayed. The error
information includes the error occurrence time, error code, and details of the error.Maximum log count: 5Error
information length: Max. 128 characters (excluding NULL)
Counter Explanation
SERVICE1 Service total counter 1
SERVICE2 Service total counter 2
TTL Total counter
COPY Total copy counter
PDL-PRT PDL print counter
FAX-PRT Fax print counter
REP-PRT Report print counter
2-SIDE Double-sided copy/print counter
SCAN Scan counter
C1 Cassette 1 jam counter
C2 Cassette 2 jam counter
C3 Cassette 3 jam counter
C4 Cassette 4 jam counter
MF Manual feed tray pickup total counter
2-SIDE Double-sided paper pickup total counter
FEED Feeder pickup total counter
DFOP-CNT ADF open/close hinge counter
T-15-27
T-15-28
Chapter 15
0017-6179
0017-6180
15-33