16.2.2 Connection
1) Turn off the main power switch of this machine, and then disconnect the cables connected to this machine.
2) Connect USB connector on the back of this machine to the PC using the USB cable [1].
16.3 Downloading System Software
16.3.1 Downloading System
16.3.1.1 Downloading Procedure (Touch panel type)
1) Turn on the power switch of the PC and start SST.
2) When the power switch is turned on, the Found New hardware Wizard appears. Click "Cancel".
3) Select "MFP" in "Target Selection", and then select "iR2018i" in "Model List".
[1]
F-16-6
F-16-7
F-16-8
Chapter 16
0017-6012
0017-6015
16-5