Download  Print this page

Reader Heater (option); Removing The Reader Heater (right); Removing The Reader Heater (left) - Canon iR2030 Series Service Manual

Ir2030/2025/2022/2018 series.
Hide thumbs

Advertisement

Chapter 4
3) Detach the cover [1].
- Screw [2], 1 pcs
[1]
4) Disconnect the connector [1] from the reader controller PCB, and then re-
move the harness from the edge saddle [2].
5) Remove the original sensor [3] together with the mount.
- Screw [4], 2 pcs
[1]
[2]
6) Remove the harness from the edge saddle/clamp [1], and then disconnect
the connector.
7) Remove the original sensor [2].
[1]

4.4.8 Reader Heater (option)

4.4.8.1 Removing the Reader Heater (Right)

1) Open the copyboard cover (or ADF).
2) remove the copyboard glass.
4-20
[2]
F-4-50
[4]
[3]
F-4-51
[2]
F-4-52
3) Detach the heater cover [1].
- Screw [2], 1 pcs
4) Remove the screw [1].
5) remove the reader heater (right) [2].
- wire saddle [3], 1 pcs
- connector [4], 1 pcs

4.4.8.2 Removing the Reader Heater (Left)

1) Open the copyboard cover (or ADF).
2) Detach the reader front cover.
3) Remove the glass retainer.
4) Remove the ADF reading glass.
5) Remove the jump board [1].
- Screw [2], 1 pcs
0017-8511
[1]
[2]
F-4-53
[2]
[4]
[3]
F-4-54
[2]
[1]
F-4-55
[1]
0017-8513

Advertisement

Table of Contents

   Also See for Canon iR2030 Series

   Related Manuals for Canon iR2030 Series

This manual is also suitable for:

Ir2025Ir2022Ir2018Ir2022nIr2022iIr2022k ... Show all

Comments to this Manuals

Symbols: 0
Latest comments: