Fan Filter; Removing The Fan Filter (Non Duplex Unit); Removing The Fan Filter (With Duplex Unit Type) - Canon iR2030 Series Service Manual

9.4.10 Fan Filter

9.4.10.1 Removing the Fan Filter (Non Duplex Unit)

1) Open the left door until it stops.
2) Remove the transfer/registration unit [1].
- Screw [2], 4 pcs.
[1]
[2]
3) Disconnect the connector [1], and then release the harness from the wire
saddle [2].
[1]
4) Remove the duct [1].
- Screw [2], 2 pcs.
[2]
F-9-44
[2]
F-9-45
[1]
[2]
F-9-46
5) Remove the fan filter [1] from the duct.
0017-8798
MEMO:
When a duplex unit is used, first remove the duplex unit and next remove
the fan filter from it.

9.4.10.2 Removing the Fan Filter (With Duplex Unit Type)

1) Draw out the drum unit.
2) Detach the rear cover.
3) Detach the left cover (rear).
4) Disconnect the relay harness [2] from the connector [1].
5) Disconnect the ground cable [3].
- Screw [4], 1 pc.
6) Remove the reusable band [5] from the duplex unit harness at the rear-left
of the main body, and then return the duplex unit harness [6] to the left
door side.
7) Rremove the transfer/registration unit [1].
- Screw [2], 4 pcs.
[1]
F-9-47
[5] [3] [4]
[6]
[1]
[2]
F-9-48
[1]
[2] [2]
F-9-49
Chapter 9
0017-8832
9-11